How to Prepare Your Appliances for a Move

A refrigerator, washer or dryer can travel well — as long as it’s ready. Proper preparation prevents leaks, bad odours and damaged appliances. Here’s what to do, step by step.

What Bon Avenir takes care of

  • We do: protecting, transporting, carrying up stairs if needed, and placing your appliances where you want them.
  • We don’t do: electrical, plumbing or gas disconnections and reconnections. These require a qualified professional.

Moving just one appliance? Our furniture and appliance delivery service takes care of it. For a full move, see our residential moving service.

Appliance by appliance

Appliance Before the move Who disconnects it
Refrigerator, freezer Empty, defrost and dry the day before; shut off the water line of the dispenser You (plug); a plumber if the water connection is unclear
Washer Shut off the taps, drain the hoses and the drum, reinstall the transit bolts if the manual calls for them You (plug, hoses)
Electric dryer Empty the lint filter, detach the exhaust duct You (plug)
Gas dryer or stove Book an appointment before the date A holder of a gas appliance technician certificate
Electric stove Clean the oven, remove and pack the racks separately, secure the door You if it has a plug; an electrician if it is hard-wired
Dishwasher Empty, dry with the door open, shut off the water supply A plumber for water and drain; an electrician if it is hard-wired
Microwave Remove and pack the turntable separately You (plug); an electrician if it is built in and hard-wired

Before the movers arrive

Prepare your appliances the day before, or at least a few hours before we arrive.

  • Empty them completely: food, clothing, accessories and removable parts.
  • Clean and dry them: a damp surface encourages odours and mould during transport.
  • Unplug the cord and shut off water valves, if applicable.
  • Secure doors and drawers with painter’s tape, which won’t damage the finish.
  • Clear the path: the appliance must be accessible, with no boxes or furniture in front of it.
  • Keep together the manual, screws and small parts in a labelled bag.

Also think about fixed items: our movers do not go up on roofs. Antennas or equipment installed on the roof must therefore be removed in advance. For curtain rods, frames and mirrors, mention it in your request.

Refrigerator and freezer

Defrosting. Empty and unplug the appliance the day before. A freezer can take several hours to defrost: place towels or a tray to catch the water.

Cleaning. Wash the inside, dry it well, then leave the door ajar for a few hours so it dries before moving day.

Water or ice dispenser. The water line must be shut off and disconnected before the move. If you’re unsure about the connection, call a plumber.

Transport. A refrigerator preferably travels upright, well protected and strapped down. Our teams use blankets, straps and a hand truck to keep it in place.

Restarting. Follow your model’s manual: the waiting time varies by manufacturer and by the position it travelled in. For example, Liebherr recommends about 2 hours of rest after upright transport, and at least 12 hours if it travelled lying down. Wait until the appliance is cold again before putting food back in.

For more details, read our guide how do I move my refrigerator.

Preparation checklist

  • Appliances emptied, cleaned and dry
  • Freezer defrosted, water wiped up
  • Cords unplugged, valves shut off
  • Hoses drained and stored with the washer
  • Doors and drawers secured with painter’s tape
  • Appointments booked for gas, electrical or plumbing connections
  • Path clear to the appliances

Washer and dryer

Hoses. Shut off the water valves, then disconnect the supply and drain hoses. Empty them into a bucket and store them with the appliance.

Draining. Depending on the model, water may remain in the tub or in the drain filter. Drain it following the manual to avoid leaks in the truck.

Drum. Many washers, especially front-loading ones, have transport bolts or spacers to lock the drum. Reinstall them if your manual recommends it.

Dryer. Empty the lint filter, unplug the cord and detach the exhaust duct. A gas dryer must be disconnected by a qualified technician (see below).

Our article how to prepare your washer for a move offers more tips.

Electrical, water and gas connections: who does what?

Unplugging a cord from an existing outlet, or plugging it back in, is everyday use that you can handle yourself. Work on the installations themselves, however, is regulated in Quebec.

  • Electricity: an appliance wired directly to the panel or the wall, or an outlet to add or modify. This work requires a licensed electrical contractor, holder of an RBQ licence and qualified by the CMEQ, even in your own home.
  • Water: a faucet, drain or line to add or modify. Call a plumbing contractor qualified by the CMMTQ.
  • Gas: a gas stove or dryer. Its installation, connection, start-up and removal are reserved for holders of a gas appliance technician certificate.

Book these appointments in advance: they must take place before our arrival at the departure address, then again after delivery at your new address.

On arrival

  • Point out the spot for each appliance: we’ll place it there.
  • Check the outlet and connections at the new home: if the plug doesn’t match the outlet, don’t improvise — call a professional.
  • Remove the washer’s transport bolts before the first wash, then level it.
  • Run an empty cycle first and watch the hoses for leaks.
  • Reconnect the dryer’s exhaust duct before using it.
  • Wait the manufacturer’s recommended time before plugging the refrigerator back in, then check that it’s cooling.
  • Have the connections checked on the dishwasher or stove before using them, if they were disconnected.

Frequently asked questions

Do Bon Avenir movers disconnect appliances?

No. We protect, transport and place your appliances, but we do not handle disconnections or reconnections. Unplug the cords yourself and leave electrical, plumbing or gas connections to a qualified professional.

How long should I wait before plugging a refrigerator back in?

Follow your model’s manual. The waiting time depends on the manufacturer and on the position the appliance travelled in: for example, Liebherr recommends about 2 hours after upright transport and at least 12 hours after transport lying down.

Do I need to lock the washer’s drum?

It depends on the model. If your manual includes transport bolts or spacers, reinstall them before the move and remove them before the first wash.

Can you move just one appliance?

Yes. Our furniture and appliance delivery service handles it, from pickup to placement. Describe the appliance and the access conditions in a free quote request to get a price.

Who disconnects a built-in dishwasher?

A professional: it is connected to the water supply, the drain and often directly to the electrical system. Book an appointment before moving day, then another after delivery to reconnect it.

Sources: RBQ – electrical licence (FR); CMEQ – electricity in my home (FR); RBQ – obtaining a licence (FR); Québec.ca – gas appliance technician certificate (FR); Liebherr – refrigerator transport guide (FR).

More articles in: Moving advice

fleche